How to Connect Your Spa with Ethernet Over Power
This video introduces how to connect your spa with Ethernet over power to your home network. If your spa was ordered with an EOP module it will be connected to the motherboard and processor card of your spa pack. Remove the spa pack cover and ensure that the EOP, modular and Ethernet cables are plugged in. Plug your other EOP module into a power point next to your home router.
Then connect your either net cable to the EOP module and the power and Ethernet light should be illuminated. Next connect the Ethernet cable from the EOP module to your home router. The two EOP modules should be communicating with each other now.
Go to your spa’s LLP settings and see if your spa has received an IP address from your home router. .100 or .0 are false numbers any other numbers are fine. Open your Arctic Spas app on your smart phone or table and connect your spas using the land bottom on the app. This may take 6-8 tries for your app to find your spa on the home network. If you’re having troubles connecting your spa to your home network, the quick reference flow charts provide trouble shooting guidance.